Image Image Image Image Image

Welcome to! Choose Wired for microphones without wireless, or Wireless for complete wireless systems.  Be sure to also check out all the new products in the news section.

Scroll to Top

To Top


On 04, Jun 2012 | No Comments | In | By amt


The AMT P43S is the second generation harp microphone system from AMT. Designed, manufactured by hand, and distributed by Applied Microphone Technology in the USA.

The P43S is a mini condenser microphone for professional live and studio use. The P43S qualities include a natural & even reproduction of sound, resistant to feedback, with the ability to capture the delicacies and beauty of a harp. The system comes with one AMT microphone with Iso-Ring technology, an AMT inline preamp (phantom power required), and a clamp to fit onto the harp. The P43S microphone is attached to a two-part clip. The clip will fit into the sound holes in the back of almost any harp. Simply turn the thumbscrew to loosen the clip, slide it over the edge of a sound hole, and tighten the thumbscrew again. The gooseneck can be bent to point the microphone straight in or at an angle, and to position it either outside or inside the body of the harp.

The P43S incorporates a flat frequency response which allows the microphone to reproduce sound as natural as possible. The inline preamp can be placed on the floor, a belt clip, or in your pocket. A low roll-off filter as well as a dB cut are including on the inline preamp. The system includes a soft carrying pouch, 6 ft of cable, P43S clamp, and the AMT inline preamp (phantom power required).