Home > Products > AMT WS

AMT WS

Endorsed artists using this product

Dan Willis
Eddie Daniels
Alvin Batiste
Mel Martin
David Krakauer
Richard Stoltzman
Harry Skoler
Marcus Miller

This product is especially suited for

Clarinet
Oboe
Alto Flute
Bass Flute

Listen and watch:

	AMT Audio Overview.
	A brief audio overview of AMT.
	Dan Willis - Place Of Enlightenment
	Dan Willis band in a studio with Ron Oswanski on Accordion with the ACC3 and the AMT WS on Oboe.
	Eddie Daniels - My Little Suede Shoes
	Eddie Daniels walks into the and asks the studio engineer to take down his trusted ..... microphones. Eddie suggested using the AMT WS Studio. This is the result..
	Eddie Daniels - Surrey With A Frindge On Top
	Eddie Daniels using the AMT WS Microphone System. A special thanks to Eddie Daniels for this rare clip!
	Marty Paglione Pod Cast with Tony Miceli
	Tony interviews Marty about some technical issue's related to AMT Microphones and technical information in general. Microphone bleed, rejection rate, etc etc..
	The Harry Skoler Quintet with Strings
	Harry using the AMT WS in a live performance.
	Live @ NAMM 2009 with Full Compass
	Kevin and Kyle stopped by the AMT booth to talk a bit about new AMT Products!

Polar pattern

Frequency Response

Pre-amp

CLARINET, OBOE, ALTO FLUTE & BASS FLUTE DOUBLE MIC SYSTEM. AMT WS double clarinet microphone is the perfect choice for the player that needs control of there volume in a belt pack style setup. Excellent choice for soft to loud music. Principal artist or soloist microphone setup. Both microphone's are suspended in a 4 point isolation ring reducing key and handling noise. Phantom power or 9Volt battery required. Comes with BP40 beltpack style preamp, case, and AMT disconnecting cable technology to allow the microphone to be used as "W"ireless or "Studio" models if needed. *Additional cables for a variety of setups sold separately. **AMT Interface also sold separately to allow connections for many wireless systems. See the website for more info on AMT Interfaces.

The included belt pack houses a volume control, contours the setup for the intended instrument, and powers the microphone system appropriatly. A low Z cable and case is included.

The AMT WS models including WSW, WS Studio, and the WS all come with TWO isolation rings now. Both microphones are suspended in AMT's iso-ring technology which allows more gain before feedback and less handling noise.

Clarinet
Alto Flute
Bass Flute
Oboe

All WS microphones that have a disconnecting cable are compatible with the Wi5C wireless system.

Specifications:

Element	Condenser
Polar Pattern	Figure 8
Frequency	30Hz - 20kHz
Sensitivity	-68dB+ 4dB
Impedance	150 Ohms*
Phantom Power	12 to 52 vDC* Or Self-powered battery
Max input SPL	140 dB
Dimension	13" Flex Arm
Cable	10'
Weight	Mic only: 31 grams

Comes with:

AMT WS Microphone
BP40 Belt pack Preamp
1/4 - XLR Cable
Hard shell Blo-mold protective case.

Wireless Ability:

All WS microphones with a disconnecting cable are compatible with the new AMT Wi5C wireless system.

The AMT WS can be used with most major brand wireless belt pack transmitters and recievers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. When ordering the AMT Interface, be sure to know your wireless make, model, and pin out configuration. Interfaces are made to order.

Other:

Please also see the AMT WS Studio model for studio or sound engineer use. The AMT WS Studio comes with the AP40 Floor Preamp.

AMT WS in use...

Clarinet

Oboe

Alto Flute

Bass Flute