![]() Endorsed artists using this productPat MethenyThis product is especially suited forGuitarListen and watch:
Polar pattern
Frequency Response
Pre-amp
|
The S3G is a unique, low-profile condenser microphone that can only be used with an acoustic guitar that has a sound-hole under the strings. This microphone incorporates an omni pattern to capture the sound from inside the guitar.
The AMT S3G features a flexiable gooseneck, allowing the player to position the microphone for the best possible tone reproduction. It's rugged construction of anodized aviation aluminum makes it highly durable, while being lightweight and non-corrosive.
The S3G is terminated by a 3.5mm plug which connects to a belt pack preamp. The included belt pack houses a volume control, contours the setup for the intended instrument, and powers the microphone system appropriatly. A low Z cable and case is included.
| Element | Condenser |
|---|---|
| Polar Pattern | Omni |
| Frequency | 20Hz - 20kHz |
| Sensitivity | -65dB+ 4dB |
| Impedance | 150 Ohms* |
| Phantom Power | 12 to 52 vDC* Or 9 Volt battery |
| Max input SPL | 138 dB |
| Dimension | 3.75" Flex Arm |
| Cable | 6' |
| Weight | Mic only: 27 grams |
The AMT S3G can be used with most major brand wireless belt pack transmitters and recievers. With the AMT Interface, the microphone can plug directly into the interface which then plugs directly into most major brand wireless units. When ordering the AMT Interface, be sure to know your wireless make, model, and pin out configuration. Interfaces are made to order.