Image Image Image Image Image

Welcome to AppliedMicrophone.com! Choose Wired for microphones without wireless, or Wireless for complete wireless systems.  Be sure to also check out all the new products in the news section.

Scroll to Top

To Top

Products

On 14, Jul 2016 | No Comments | In | By amt

Quantum 7

AMT Quantum7 Wireless System. Includes Q7 AA powered transmitter with true diversity receiver, rack ears, and extension cables. The Quantum7 transmitter clips on to all AMT microphones that include D.C.T. Simply disconnect the cable from the microphone and plug in the transmitter.

This package is only the wireless. Microphone sold separately. If your looking for both a microphone and wireless system together, see the Q7-LS, Q7-P800, etc etc

The AMT Quantum 7 is a high quality diversity wireless system designed for musical instruments. With 100 channels to choose from (region dependent) the system is simple to use while providing professional quality sound. The Q7 works with all past and present AMT models that include a disconnect (D.C .T.). Clip on the transmitter to create an operating environment free of belt packs and wires. The receiver is a true diversity design allowing the wireless reception up to approximately 100 meters. The receiver is constructed with a rugged metal chassis which includes both a 1/4 in and XLR output. It includes high quality transient response, no delay, no background noise, with multi-level narrow band filter technology.

Read more…

On 14, Jul 2016 | No Comments | In | By amt

Quantum 7 Mini

The AMT Q7 MINI wireless system.  Wireless system complete without microphone to be used AMT microphones.  The new Q7 Mini system includes the Q7 transmitter and the new mini receiver.  The system is designed small enough to fit in your horn case or travel bags with ease.  Setup is quick and easy with the antenna’s fixed onto the system so there’s no need to attach them, carry Mini-Receiverthem separately, or be concerned with losing them.  The Mini is powered by a standard 12V power supply or for even quicker and more portable setups can be power by AA batteries.  The Q7 transmitter is powered by one AA battery.  Just like the Quantum 7 true diversity receiver, the Q7 Mini has 99 channels (frequency dependent) and sync’s with the Q7 transmitters via infrared.  The receiver is the perfect addition to your current 900mhz Quantum system or order the complete setup with microphone and transmitter. Additional frequency bands for territories outside of the USA will be available soon.

The AMT Q7 MINI receiver is the perfect addition to any of the Quantum 7 wireless system residing in the 900 mhz frequency range. (In the USA, additional frequency bands to be release soon.)  The new Mini receiver will sync with Q7 and Q7-5C transmitters. Additional frequency bands for territories outside of the USA will be available soon.  The receiver is small enough to fit in your horn case or travel bags with ease.  Setup is quick and easy with the antenna’s fixed Mini-Controlsonto the system so there’s no need to attach them, carry them separately, or be concerned with losing them.  The Mini is powered by a standard 12V power supply or for even quicker setups can be power by AA batteries.  Just like the Quantum 7 true diversity receiver, the Q7 Mini has 99 channels (frequency dependent) and sync’s with the Q7 transmitters via infrared.  It’s the perfect accompaniment to your current Quantum system or order the complete setup with microphone and transmitter.

The Q7-Mini can be ordered separately or with an AMT microphone.  (Q7-LS Mini, Q7-P800 Mini, etc etc)

Features:

PLL Synthesized, pre-set 100 selectable frequencies

Antenna diversity maximum range to 80 meters

Pre-set 100 (10X10) channels.  IR synchronization.

High fidelity sound, with no loss.

LCD display show the RF level, AF level, channel and frequency.

No need for bodypack.  Transmitter mounts to AMT microphones.

Receiver powered by 9V power adapter OR 2 – AA batteries.

1/4in Output.

Transmitter:

Frequency Range: 600-952Mhz (Region dependent)

RF Power: 10mW

Frequency Deviation: 48KHz

Antenna: 1/4 wave Length wire type

Battery Voltage: 1/5V (1x 1.5V AA Battery)

Power Consumption: 10-12 Hours

Receiver:

Sensitivity: -110dBm

Signal / Noise Ratio: .105dB

Power Supply: DC9V / 500 mA

Audio Output: 1 – 1/4in

 

On 13, Oct 2015 | No Comments | In | By amt

Wireless Harmonica

AMT offers two complete wireless system for Harmonica.  Both the HR3 and HR3R are offered with the Quantum 7 wireless system to create a complete beltpack free harmonica wireless microphone system.

Q7-HR3 – Complete true diversity wireless microphone system for Harmonica (HR3) (Includes Q7 AA powered clip-on transmitter, true diversity 99-channel receiver, AMT HR3 harmonica microphone, rack-ears for receiver, and extension cables.)

Q7-HR3R – Complete true diversity neck mounting wireless microphone system for Harmonica (HR3R includes neck brace mounting hardware.) (Includes Q7 AA powered clip-on transmitter, true diversity 99-channel receiver, AMT HR3R harmonica microphone, rack-ears for the receiver, and extension cables.

Read more…

On 22, Aug 2014 | No Comments | In | By amt

Bassoon

The AMT BAS-W is a complete double microphone system with wireless for Bassoon. Similar in design to the WS Clarinet, TA2 Soprano, and BAC Bass Clarinet systems, the BAS is a complete setup with wireless, clamping, microphones, receiver and a case.  The BAS-W system includes TWO LS microphone which are the top of the line for woodwind instruments recreating the most natural sound possible.  The clamp is designed to strap to both the top and bottom of the Bassoon to reproduce the full range of the instrument.

The WI5IIC wireless system includes TWO 5C transmitters, one for each microphone.  The ZRIII dual receiver accepts signal from both transmitters which allows the complete system to operate with one receiver. Non obtrusive clamps are provided to mount the microphones onto the bassoon.

The new AMT BAS-W Bassoon system comes complete with two 5C transmitters (clip-on), the ZRIII Dual Receiver (Wi5IIC), clamping straps, and a case. Available in two frequency bands the system can be ordered in the 902-928mhz range or 863-865mhz range for Europe. Very simple to setup, the 5C can be attached to the microphones which are clamped onto the bassoon.
Read more…

On 19, Aug 2014 | No Comments | In | By amt

Accordion – Wireless

AMT offers several options for accordion:

  • ACCX – W, External Single Microphone for small accordions.
  • ACCW – Complete 3 mic wireless setup for full size accordions. (Includes dual mic (ACCR) for right hand, single microphone setup (ACCL) for left hand, Wi5IIC wireless system with transmitters for right and left hands, cables, and case.
ACCW - Complete wireless system

ACCW – Complete wireless system

The ACCW is a complete three microphone wireless setup for accordion that includes: dual microphone (ACCR) for right hand, single microphone (ACCL) setup for left hand, Wi5IIB dual wireless system with transmitters for both right and left hands, cables, and case.The 5C transmitter controls the right hand and 5B transmitter with volume control for the left. Volume of both transmitters can be controlled from the receiver or separately on the mixing board and additionally from the 5B transmitter. The only dual wireless system on the market that allows for complete control of right and hands in one 1/2 space rack mountable wireless system.
ACCR is a dual self contained microphone for the right hand of the accordion. Includes two microphones balanced for the accordion which allows the lower bassoon reeds to stand out from the higher volumes that the clarinet and piccolo reeds can produce. The microphone mounts with either dual lock velcro to allow for easy transitions to other accordions, or can mount with the included mounting blocks via a screw system for more of a permanent setup. With either mounting option, the ACCR can be removed easily after each use.

The ACCL is the left hand microphone and the included mounting hardware. It is included with the ACCW and installs into the left hand side of the accordion without a need to open the bellows. The ACCL is installed by simply removing the bass strap and cover. It is placed inside near the bass machine with a cable and connector placed on the outside of the accordion where convenient.
The ACCW includes the Wi5IIC wireless system plus an additional transmitter for the left hand. (5B) The wireless system is capable of dual transmission and allow for both the 5C and 5B transmitters to transmitter the right and left hands at the same time to a single 1/2 space rack receiver. The 5B transmitter can control the volume of the left hand on the instrument and the ZRIII receiver will control both the right and left hand volumes separately. The receiver additional offers dual XLR outputs which allows even further control of the right and left hand volume at the mixing board!

 

  • ACCRW – The ACCRW includes the ACCR dual microphone system that fastens to the grill of the accordion with the included 5C wireless transmitter attached to the microphone bar creating a completely wireless accordion microphone system for the right hand of mid to full size accordions.
    AMT ACCRW - Right hand Accordion wireless system

    AMT ACCRW – Right hand Accordion wireless system

    The microphone system takes into consideration many features which will be important for the player. Easy to install, the system on the right hand side of the instrument, attaches with a slim designed clamping system that holds the microphone bar on the grill of virtually any accordion and transfers from one accordion to another quickly.

    The clamps are designed with the flexibility to mount in a variety of ways to accommodate many different grill lengths and designs.

    The microphones are the most natural sounding systems built by hand today. The right hand side incorporates a special design which allows for plenty of gain before feedback. Consideration is taken to help with lower volume levels produced by some bassoon reeds by adjusting the system to instantly respond to lower frequencies. Since many accordions have a high SPL level when all reeds are sounding, AMT has allowed the SPL levels to be high while allowing the full and natural range of the instrument to be reproduced.

    • Easy to Install.
    ⁃ Right hand microphone mounts to pillow blocks for easy removal after use.
    ⁃ Pillow blocks mount to instrument with 3M Dual Lock velcro or optional set screws for a more permanent installation.
    ⁃ Move the right hand microphone (ACCR) between instruments quick and easily with included pillow block / dual lock Velcro system.

    • The easy install system provides complete wireless operation with no permanent holes or damage to the accordion. Use of existing holes maybe necessary.
    • Move the microphone system between accordions quickly. (Right Hand side)
    • Additional mounting hardware and left hand microphones sold separately for use on multiple accordions.

    See the ACCW for a complete right and left hand wireless setup.

 

  • Wi5IIB – ACC, – Wireless System for mono setups. (Microphones not included)  Use with old accordion systems from Musictech, Sano, etc etc.
  • Wi5IIB – ACCS – Wireless System for stereo setups. (Microphones not included)

Read more…

On 15, Mar 2013 | No Comments | In | By amt

AMT Wi5IIV

AMT Wi5IIV Dual Wireless Vocal System

AMT Wi5IIV Dual Wireless Vocal System

AMT has designed the AMT Wi5IIV Wireless Vocal System for professional sound applications and working musicians alike.  Possibilities are endless with AMT Wi5II wireless systems, which allow both the use of handheld, wireless and the legendary belt pack free instrument wireless system’s to work in conjunction with each other utilizing the same ZRIII Receiver system.

The Wi5IIV Vocal system comes complete with two handheld microphones, which transmit, to the ZRIII Dual Receiver.  Both handhelds can be used at the same time with each side of the receiver accepting transmission from one of the handhelds creating a dual microphone system.

Read more…

On 12, Jun 2012 | No Comments | In | By amt

AMT Wi5IIB

The Wi5IIB & 5B wireless system, now available in the 863-865 and 902-928 Frequency Range.
The Wi5IIB belt pack system is the answer for any player looking for a multi channel belt pack wireless system. It includes all the same features as the Wi5IIC however clips to the belt instead of the microphone. The 5B transmitter is lite in weight and the perfect choice to combine with an AMT Z1 Flute or WS Clarinet microphone to keep the weight as lite as possible.

The 5B includes a volume control as well as a mute button. The Wi5IIB / 5B will connect to all current AMT Microphone’s with disconnecting cables. The 5B transmitter can be combined with a 5C transmitter and the ZRIII Dual Receiver to operate two wireless microphones at the same time.   It is also possible to combine the 5B with the 5V vocal microphone if a talk back or vocal microphone is desired.

The 5B transmitter is one of the smallest beltpack style transmitters on the market and the only transmitter on the market with a volume control right on the beltpack.  The Wi5IIB wireless system ships with the belt pack transmitter, ZRIII receiver, and a case.  The 5B transmitter operates on 1 – AA battery and gets about 7 hrs of continuous use.

Wi5IIB – Complete system
Z1-5B – Complete wireless flute microphone.
5B – Transmitter only with cable.

If you want to add this wireless system to your existing AMT microphone, choose the Wi5IIB.  If you would like to add the 5B transmitter to a ZRIII receiver that you already own, choose the 5B.

Read more…

On 09, Jun 2012 | No Comments | In | By amt

AMT WS-5C

The new WS-5C system comes with AMT’s flagship WS microphone, and the Wi5IIC Wireless system. Designed, manufactured by hand, and distributed by AMT throughout the world. The WS is the #1 choice for top professionals that look for the most natural sound reproduction possible from a clip on microphone. A professional player spends their entire life creating ‘their’ sound, and AMT has spent its entire lifetime working to capture those sounds. Combine the success of the WS with AMT’s second generation wireless system, the Wi5IIC, and you’ll have a package that will not only change the playing experience but allow the audience to hear what exactly what you want them to hear.

Read more…

On 09, Jun 2012 | No Comments | In | By amt

AMT P808-5C

AMT P808-5C Wireless Trombone Microphone

AMT P808-5C Wireless Trombone Microphone

AMT P808-5C complete wireless system for trombone, brass instruments, and high SPL trumpet players looking for a microphone mounted to the bell.

The P808-5C is the answer for any player looking for a belt pack free wireless system for trombone, brass instruments, and high SPL trumpet players looking for a microphone mounted to the bell. The new P800-5C system comes with AMT’s flagship P808 microphone, and the Wi5IIC Wireless system.

Read more…

On 09, Jun 2012 | No Comments | In | By amt

AMT VS-5C

The VS-5C is the answer for any player looking for a belt pack free wireless system. The new VS-5C system comes with AMT’s flagship VS microphone, and the Wi5IIC Wireless system. Designed, manufactured by hand, and distributed by AMT throughout the world. The VS is the #1 choice for top professionals that look for the most natural sound reproduction possible from a clip on microphone. A professional player spends their entire life creating ‘their’ sound, and AMT has spent its entire lifetime working to capture those sounds. Combine the success of the VS with AMT’s second generation wireless system, the Wi5IIC, and you’ll have a package that will not only change the playing experience but allow the audience to hear what exactly what you want them to hear.

Read more…